Android Engineer
09:04:2024 08:46:42
13:04:2024 14:50:06
My android engineer including flash tools, drivers, support tools, etc
install MT65xx_Preloader and QcommMtk_driver_setup
when you first installing driver you should use Auth_Bypass_Tool_V6.0.0.1+libusb-win32-devel-filter-1.2.6.0.rar/MTK_Auth_Bypass_Tool_V6.0.0.1/mtksecbypass.exe instead of mtk_bypass_rev4.exe
- connect your phone with holding power and vol + and vol - together
OR put phone to USB without battery, the VCOM driver will be shown in device manager
- then click reload preloader wait until phone reset the USB automatically
- then click bypass to install mtk driver automatically when phone connected on download mode.
- now you can flash the phone using SP flash tool
Rx Timeout
when you facing RX timeout while disabling auth USB, you should take off battery cable then re-insert it to reset USB configuration on the phone.
Cannot Download Firmware After Disable Auth
when you're facing cannot download firmware after disabled auth
- take off battery cable
- re-insert the cable
- open Auth_Bypass_Tool_V6.0.0.1+libusb-win32-devel-filter-1.2.6.0.rar/MTK_Auth_Bypass_Tool_V6.0.0.1/mtksecbypass.exe
- click read preloader
- wait until the button re-enabled
DONT PUT OFF USB CABLE
- click disable auth
- wait until finished
- Now you can flash using SP Flash Tool or Other MTK tools [read here]